Oil pressure sensor

Also known as Guzzi ref. 1A011730

 1 in stock

 643090 MG643090

Oil pressure switch M10 thread

Supercedes Guzzi no. 1A014570

 This part is due back in stock soon, call 01484 841395 to reserve yours

1A017929

Piston for oil pressure relief valve in lower crankcase

 This part is due back in stock soon, call 01484 841395 to reserve yours

 31150950 GU31150950 31 15 09 50
 3115 0950 3115.0950 31.15.09.50

Single length of breather pipe used for oil return and breather applications depending on model.

Also known as Guzzi ref. 00823946060

 2 in stock

 28157550 GU28157550 28 15 75 50
 2815 7550 2815.7550 28.15.75.50

Length of pipe used for oil return and breather applications depending on model

Also known as Guzzi ref. 12157600. This pipe has an outside diameter slightly larger than the original so will not fit through the hose support bracket on some models

 1 in stock

 95985136 GU95985136 95 98 51 36
 9598 5136 9598.5136 95.98.51.36

UFI 25 531 00 cartridge oil filter for 1989 on small block engines. See TOA19001 for a inexpensive tool to loosen and tighten the dipstick

For an oil change we also recommend 1x ENA90444 (Oil filter cover O ring), 1 x SIA10070 (large sump drain crush washer), 1 x SIA10900 (small sump drain crush washer) and 1 x SIA12200 (filter cover crush washer). Some 750 XPA models use SIA19530, we advise you to check your old filter before ordering. Also known as Guzzi ref. 2A000633

 More than 5 in stock

 27153085 GU27153085 27 15 30 85
 2715 3085 2715.3085 27.15.30.85

UFI 25 46 500 cartridge oil filter. See TOA19001 for a inexpensive tool to loosen and tighten the dipstick

For post 1989 V35, V50 and V65 models use SIA27300 .
NB Packaging may vary. For an oil change we also recommend 1x ENA90444 (Oil filter cover O ring), 1 x SIA10070 (large sump drain crush washer), 1 x SIA10900 (small sump drain crush washer) and 1 x SIA12200 (filter cover crush washer)

 More than 5 in stock

 19153000 GU19153000 19 15 30 00
 1915 3000 1915.3000 19.15.30.00

8 sided UFI 23 287 00 cartridge oil filter with sealing rubber.

From late 2015 onwards 1200 models used SIA06428

See SIA15301 for alternative filter from Mahle. Please note that Daytona 1000 models where filter screws into base of sump require SIA14530. This is a 8 sided oil filter. Use tool TOA41006 if your filter is located inside the sump, use tool TOA01201 if you change your oil filter without removing the sump



See ENA90948 for the oil filter cover o ring

 More than 5 in stock

 30153000 GU30153000 30 15 30 00
 3015 3000 3015.3000 30.15.30.00

Cartridge oil filter UFI 23 149 00

Fits Daytona 1000 models where filter screws into base of sump. This is an 8 sided UFI filter.
Use tool TOA41006 if your filter is located inside the sump, use tool TOA01201 if you change your oil filter without removing the sump.

You may also require SIA10070 which is the crush washer for the drain plug and ENA14036 (sump gasket). Please note that Daytona RS and T5 Polizia use filter SIA15300

 More than 5 in stock

 14153000 GU14153000 14 15 30 00
 1415 3000 1415.3000 14.15.30.00

High quality German made Mahle OE quality cartridge oil filter with sealing rubber.

From late 2015 onwards 1200 models used SIA06428

Please note that Daytona 1000 models where filter screws into base of sump require SIA14530. This is a 14 sided oil filer which is compatible with our oil filter tools TOA41005 and TOA01200. This Mahle filter is shorter that the equivalent UFI filter. See ENA90948 for the oil filter cover o ring

 More than 5 in stock

 30153000 GU30153000 30 15 30 00
 3015 3000 3015.3000 30.15.30.00